Parabond 600

Article Number
100671

High quality adhesive based on hybrid polymers, highly suitable for bonding almost all materials on almost all surfaces (porous and non-porous). Very powerful and high initial adhesion (high tack), without the need for clamping. 

  • Hybrid polymer based adhesive sealant
  • High initial bonding strength (‘high tack’)
  • High final strength
  • Bonds also with slightly moist supports
  • Does not cause any corrosion in metal joints
  • Suitable for use with natural stone
  • Paintable with most water and solvent based paints
  • Solvent, isocyanate and phthalate free
  • Permanently elastic
  • U.V. and weather-resistant
  • Good resistance to finger picking (you get a seal which is harder to pick by hand)
Color Signal grey
Content
290ML
Content secondary packaging
25
Parabond 600 is available to buy in increments of 25.

Best sold
More Information
Type of product Hybrid polymer
Short description High quality adhesive based on hybrid polymers, highly suitable for bonding almost all materials on almost all surfaces (porous and non-porous). Very powerful and high initial adhesion (high tack), without the need for clamping. 
Applications
  • For interior and exterior use.
  • Gluing of panels and elements in the interior and ceiling construction: wall cladding elements and ceiling panels (interior), isolation panels (mineral wool, wood-wool cement & plastic foams, PUR, PIR, PS)
  • Wooden & plastic laths, ornaments, frames, doorsteps, window sills, skirting boards, roofing elements...
  • Gluing and fitting of safety glass in the banking industry and fitting of cable ducts, mitres in aluminium windows, mirrors etc.
  • Can be used for bonding materials in the automotive.
  • Secure environments (i.e. prisons, hospitals...) where the sealant is hard so it can’t be picked out by hand (not for external glazing applications!).
  • Bonds without primer on almost all materials used in the construction industry, such as aluminium, galvanized and stainless steel, zinc, copper, natural stone, concrete, brick, HPL panels, treated wood, gypsum, glass, various synthetic materials, etc
Color tone Grey
  • GEV Emicode EC1plus label: very low VOC emissions
  • French VOC emission class A+
  • IKI-report for the use in hospitals as glue and adhesive for wall panels.
A+ IKI EC1plus

Information request

Contact Info