Parabond Parquet 440

Article Number

105333

Elastic hybrid polymer based parquet adhesive for the bonding of all types of parquet.

This adhesive is very easy to spread and apply and dries fast: one can thread on the parquet after curing for 24 h. Is also suitable for underfloor heating.

Technical data sheet

1-component parquet adhesive
Ready-to-use
Excellent stance (adhesive lines remain stable)
Very easy to apply
Powerful and permanently elastic: absorbs the working movement of parquet floors
Parquet can be treaded after 24 hours
Better acoustic comfort
Solvent, water, isocyanate and phthalate free
Suitable for all composite parquet that complies with the EN 13489 standard
Solid parquet: suitable for dimensions up to 180 mm wide and 14 mm thick and slenderness factor up to 12.8 (tested on solid oak according to NF B54 008 - FCBA report)
Solid parquet: suitable for dimensions up to 200 mm wide and 20 mm thick and slenderness factor up to 10 (tested on solid oak according to NF B54 008 - FCBA report).
Low odour

Skip to the end of the images gallery

Skip to the beginning of the images gallery

More Information

More Information
Type of product	Hybrid polymer
Short description	Elastic hybrid polymer based parquet adhesive for the bonding of all types of parquet.
Applications	Suitable for solid parquet, multi-layer parquet, mosaic parquet, industrial parquet (slat on side/slat on edge), lamparquet, chipboards and OSB. Suitable for the most common types of wood and particularly suitable for problematic woods such as beech, maple and bamboo. For both absorbent and non-absorbent surfaces. Suitable for solid oak parquet up to 200x20 mm. Suitable for use on floors with underfloor heating and floor cooling (reversible system) (depending on the approval of the flooring manufacturer), if applied fully with a notched trowel.