Primer PU Turbo

Article Number

104470

Very fast working, ready to use adhesion primer: the floor can be glued after 1 hour. Also suitable as a moisture barrier for cement-bound screeds and concrete with a residual moisture content of up to 4%.

Technical data sheet

Ready-to-use
Non-flammable
1-component adhesion and moisture primer based on polyurethane
Strengthens powdery and brittle, absorbent substrates
Enables fast further work: parquet can already be installed after 1 hour
Contains no VOCs
Improves the adhesion of parquet adhesive to the screed
Solvent free

Skip to the end of the images gallery

Skip to the beginning of the images gallery

More Information

More Information
Short description	Very fast working, ready to use adhesion primer. Also suitable as a moisture barrier for cement-bound screeds and concrete.
Applications	Suitable as an adhesion primer on absorbent surfaces such as cement-bound screeds, concrete floors and dry anhydrite subfloors (<0.5% residual moisture). Suitable as an adhesion primer for underfloor heating, when screed is dry. Can be used as a synthetic repair mortar for cracks (≤ 20 mm) in the screed when mixed with fine, dry sand. Suitable as a moisture barrier for cementitious subfloors with a residual moisture of up to 4% (measured with carbide meter). Suitable as an adhesion primer on cementitious subfloors (screed) that are powdery and brittle. Suitbale as an adhesion primer for ceramic tiles. Suitable as an adhesion primer and moisture barrier for leveling mortar. It is recommended to sand in the primer.